Humanitarian Relief Market Regular Polyethylene Tarpaulins Getapolyen Material

 

  P.V.C Coated & Laminated Tarpaulin P.E Nets Tie-Down & Fixing Items Others

¢ºApplication Emergency housing and Temporary shelter
¢ºSize 4M X 5M ( Finished size)
¢ºQuality Made of woven high density polyethylene fibres,
warp x weft :12/14 x 12/14 per square inch, laminated on both sides with low density polyethylene, with reinforced rims by heat sealing on all sides.And nylon rope in hem. 1000 denier minimum.
  • Stabilized against ultraviolet rays and excessive heat for long outdoor exposure (ori)
  • Provided with strong aluminum eyelets or equivalent on four sides of the single sheets at 100cm (+/- 5cm) center to center
  • Material weight : minimum 190gr /m2
  • Tensile strength : minimum 600 N both directions of warp and weft (BS 2576, 50 mm grab test, or equivalent)
  • Tear resistance : minimum 100 N both directions (BS 4303 wing tear or equivalent)
  • Bursting strength : minimum 200 N/ cm2 (BS 4768 or equivalent)
  • Flammability (Flash point) : above 200¡É
  • Color : White on one side, blue on the other, with printed LOGO on both sides for maximum visibility
  • Packing : in bales of 5 sheets and secured with polyester band
    - gross weight per bale : 22.5 kg
  • Stuffing quantity : 2,500 sheets per one 20ft container
  • Other conditions : same as usual 

¢ºApplication Emergency housing and Temporary shelter
¢ºSize 4M X 50M ( Rolls)
¢ºQuality Made of woven high density polyethylene fibres,
warp x weft :14/12 x 14/12 per square inch, laminated on both
sides with LDPE, 1000 denier minimum.

  • Stabilized against ultraviolet rays and excessive heat for long outdoor exposure. ( 3% of UV stabilizer approx. 2 years lifetime under tropical climate)
  • Material thickness : 200 ~ 300 microns ( 0.20 ~ 0.23 ) ( BS 2544 )
  • Material weight : 180 ~ 200 gr/m©÷ ( BS 2471 )
  • Material density : 0.90 ~ 0.95 kg / Cubic decimeter.
  • Tensile strength : Not less than 60 kgs both directions of wrap and weft. (BS 2576, 25mm grab test , or equivalent )
  • Tear resistance : 9kgs Min. both directions ( BS 4304 Wing Rip )
  • Flammability ( Flash point ) : above 200¡É
  • Cold crack : to withstand temperature of minumum - 20¡É +80¢ªc
  • Color : Green on both sides with CUSTOMER logo printed at regular intervals along the length of the roll for maximum visivility.
  • Packing method : Roll packing
  • Recommended quantity : 250 rolls per 20ft, 500 rolls per 40ft container
Copyright © 1999- 2004 INTERWAY Industrial Co.,Ltd. All rights reserved.
Revised: february,2004